For Measuring Repetitive Energy Measurements - Ophir Optronics PE and RP Series of pyroelectric detectors combine high accuracy, high damage threshold and high repetition rate operation in a single head.

you can measure both long pulses up to 10mS and have a high repetition rate up to 4KHz in the same detector head. The pulsed detectors also provide sensitivity down to 100pJ .

Main Features:

• Built-in wavelength correction
  
• Spectral range from 0.15 to 20μm
• Pulse rate to 4000Hz (PE10 series)
  
• Energy measurement to 10pJ (PD10-pJ)
  
• Diffuser models for high energy YAG / Holmuim /Erbium lasers
  
• Versatility: Measurements of very long and very short pulses
  
• Measurement from nW to kW, μJ to 2000 μJ with appropriate heads

Ophir

Pyroelectric and RP Heads

Energy Measurements OPHIR PE10BB-DIF -Large aperture pyroelectric head with removable diffuser for high damage threshold.

• Energy measurement range from 1.2mJ à 40J per pulse
• Wavelength range from 190nm up to 20μm (190-2.5μm with diffuser)

This new head is ideally suited to test your pulse sources.

Ophir

Energy Measurements -Pyroelectric Head 100mm